WEEK 6 REPORT

For this week, there is the explanation why Lora module was choose to be used in this project other than other RF module

The figure above show the lora module (SX1278) that has been used in this project


The figure above shows the device variants and their key parameters

SX1278
  • frequency range:     
The oscillation rate of an alternating electric current or voltage, as well as a magnetic, electric, or electromagnetic field or mechanical system, in the frequency range of 20 kHz to 300 GHz is known as radio frequency. For this lora module, its frequency range is about 137 - 525Mhz.

  • spreading factor
The spreading factor controls the chirp rate, and thus controls the speed of data transmission. Lower spreading factors mean faster chirps and therefore a higher data transmission rate. For every increase in spreading factor, the chirp sweep rate is halved, and so the data transmission rate is halved. The spreading factor for the lora module is between 6 -12. The advantage of a high SF is that the receiver has more possibilities to sample the signal power, resulting in improved sensitivity. It can receive the signal from a greater distance if it has a higher sensitivity.
  • bandwidth
The complete range of frequency necessary to convey a modulated signal carrying data without distortion or loss of data is known as bandwidth. The bandwidth for this lora module is between 7.8 - 500kHz.


Comments